Harvia Vega E Sauna Heater - 6kW - BC60E (Controls Not Included)

This heater does not include controls. Separate control panel required.

Harvia Vega is an elegant heater that is easy-to-use. The stainless steel outer casing of the heater gives your sauna a modern look. 

Vega is easy to mount on a separate mounting rack. Because of the symmetrical design, there is no need to change the handedness of the heater - it is simply selected. Electrical connections are made from the side of the heater, which makes installation easy.

Vega's structure makes it possible to mount the heater low on the sauna wall. This allows the heat to spread evenly throughout the sauna, ensuring that the lower benches also enjoy plenty of heat.

The model is controlled by a separate control unit that is not included with this heater.

Recommended controllers are listed above to the right. Please see below for which one to purchase, based on if the heater will be used Single Phase or 3-Phase.

C90 = 3-Phase Connection (Generally Commercial Use)
CX170 = Single Phase Connection (Generally Residential Use)
C150 = Single Phase Connection (Generally Residential Use)

1 Box of 5 - 10cm is required to fill this heater.

Features

• Stainless Steel Construction
• Stones not included
• Single or three phase connection (9kW is 3-phase only)